# 如何使用多雷达 ## 1 介绍 ​ 本文档将展示如何在仅运行一个驱动程序的情况解析并发送多台雷达的点云。理论上，一个驱动可以同时解码无限数量的雷达。为了方便起见，本文档将会使用三个雷达作为示例。 ## 2 在线连接多个雷达 ​ 请按照以下步骤进行配置。 ### 2.1 获取数据端口号 ​ 首先将三个雷达与计算机正确连接，并在RSView上看到每个雷达的点云。此时应已知每个LiDAR的*msop 端口 与 difop端口*。 如果对此不太了解，请先查看雷达用户指南。 ### 2.2 设置参数文件的common部分 ```yaml common: msg_source: 1 #0: not use Lidar #1: packet message comes from online Lidar #2: packet message comes from ROS or ROS2 #3: packet message comes from Pcap file #4: packet message comes from Protobuf-UDP #5: point cloud comes from Protobuf-UDP send_packet_ros: false #true: Send packets through ROS or ROS2(Used to record packet) send_point_cloud_ros: true #true: Send point cloud through ROS or ROS2 send_packet_proto: false #true: Send packets through Protobuf-UDP send_point_cloud_proto: false #true: Send point cloud through Protobuf-UDP pcap_path: /home/robosense/lidar.pcap #The path of pcap file ``` ​ 由于消息来自雷达，因此请设置 *msg_source = 1*。 ​ 将点云发送至ROS，因此设置 *send_point_cloud_ros = true*。 ### 2.3 设置配置文件中的lidar部分 ```yaml lidar: - driver: lidar_type: RS128 #The lidar type - RS16, RS32, RSBP, RS128, RS80 frame_id: /rslidar #The frame id of message device_ip: 192.168.1.200 #The device ip address msop_port: 6699 #The msop port of lidar,default is 6699 difop_port: 7788 #The difop port of lidar, default is 7788 start_angle: 0 #The start angle of point cloud area end_angle: 360 #The end angle of point cloud area min_distance: 0.2 #The minimum distance of point cloud area max_distance: 200 #The maximum distance of point cloud area use_lidar_clock: false #true--Use the lidar clock as the message timestamp;false-- Use the system clock as the timestamp angle_path: /home/robosense/angle.csv #The path of the angle calibration file. For the latest version lidars, there is no need to use this file. ros: ros_recv_packet_topic: /rslidar_packets #The topic which used to receive lidar packets from ROS ros_send_packet_topic: /rslidar_packets #The topic which used to send lidar packets through ROS ros_send_point_cloud_topic: /rslidar_points #The topic which used to send point cloud through ROS proto: point_cloud_recv_port: 60021 #The port number used for receiving point cloud point_cloud_send_port: 60021 #The port number which the point cloud will be send to point_cloud_send_ip: 127.0.0.1 #The ip address which the point cloud will be send to msop_recv_port: 60022 #The port number used for receiving lidar msop packets difop_recv_port: 60023 #The port number used for receiving lidar difop packets msop_send_port: 60022 #The port number which the msop packets will be send to difop_send_port: 60023 #The port number which the difop packets will be send to packet_send_ip: 127.0.0.1 #The ip address which the lidar packets will be send to - driver: lidar_type: RS128 #The lidar type - RS16, RS32, RSBP, RS128, RS80 frame_id: /rslidar #The frame id of message device_ip: 192.168.1.200 #The device ip address msop_port: 1990 #The msop port of lidar,default is 6699 difop_port: 1991 #The difop port of lidar, default is 7788 start_angle: 0 #The start angle of point cloud area end_angle: 360 #The end angle of point cloud area min_distance: 0.2 #The minimum distance of point cloud area max_distance: 200 #The maximum distance of point cloud area use_lidar_clock: false #true--Use the lidar clock as the message timestamp;false-- Use the system clock as the timestamp angle_path: /home/robosense/angle.csv #The path of the angle calibration file. For the latest version lidars, there is no need to use this file. ros: ros_recv_packet_topic: /left/rslidar_packets #The topic which used to receive lidar packets from ROS ros_send_packet_topic: /left/rslidar_packets #The topic which used to send lidar packets through ROS ros_send_point_cloud_topic: /left/rslidar_points #The topic which used to send point cloud through ROS proto: point_cloud_recv_port: 60024 #The port number used for receiving point cloud point_cloud_send_port: 60024 #The port number which the point cloud will be send to point_cloud_send_ip: 127.0.0.1 #The ip address which the point cloud will be send to msop_recv_port: 60025 #The port number used for receiving lidar msop packets difop_recv_port: 60026 #The port number used for receiving lidar difop packets msop_send_port: 60025 #The port number which the msop packets will be send to difop_send_port: 60026 #The port number which the difop packets will be send to packet_send_ip: 127.0.0.1 #The ip address which the lidar packets will be send to - driver: lidar_type: RS128 #The lidar type - RS16, RS32, RSBP, RS128, RS80 frame_id: /rslidar #The frame id of message device_ip: 192.168.1.200 #The device ip address msop_port: 2000 #The msop port of lidar,default is 6699 difop_port: 2001 #The difop port of lidar, default is 7788 start_angle: 0 #The start angle of point cloud area end_angle: 360 #The end angle of point cloud area min_distance: 0.2 #The minimum distance of point cloud area max_distance: 200 #The maximum distance of point cloud area use_lidar_clock: false #true--Use the lidar clock as the message timestamp;false-- Use the system clock as the timestamp angle_path: /home/robosense/angle.csv #The path of the angle calibration file. For the latest version lidars, there is no need to use this file. ros: ros_recv_packet_topic: /right/rslidar_packets #The topic which used to receive lidar packets from ROS ros_send_packet_topic: /right/rslidar_packets #The topic which used to send lidar packets through ROS ros_send_point_cloud_topic: /right/rslidar_points #The topic which used to send point cloud through ROS proto: point_cloud_recv_port: 60027 #The port number used for receiving point cloud point_cloud_send_port: 60027 #The port number which the point cloud will be send to point_cloud_send_ip: 127.0.0.1 #The ip address which the point cloud will be send to msop_recv_port: 60028 #The port number used for receiving lidar msop packets difop_recv_port: 60029 #The port number used for receiving lidar difop packets msop_send_port: 60028 #The port number which the msop packets will be send to difop_send_port: 60029 #The port number which the difop packets will be send to packet_send_ip: 127.0.0.1 #The ip address which the lidar packets will be send to ``` ​ 为每种雷达类型设置 *lidar_type* --- RS16,RS32,RSBP,RS128。 ​ 为每个雷达设置 *msop_port* 与 *difop_port* 。 ​ 为每个雷达设置 *ros_send_point_cloud_topic*。 ### 2.4 运行 ​ 运行示例程序。 ## 3 离线解析多雷达rosbag ​ 请按照以下步骤进行配置。 ### 3.1 设置配置文件中的common部分 ```yaml common: msg_source: 2 #0: not use Lidar #1: packet message comes from online Lidar #2: packet message comes from ROS or ROS2 #3: packet message comes from Pcap file #4: packet message comes from Protobuf-UDP #5: point cloud comes from Protobuf-UDP send_packet_ros: false #true: Send packets through ROS or ROS2(Used to record packet) send_point_cloud_ros: true #true: Send point cloud through ROS or ROS2 send_packet_proto: false #true: Send packets through Protobuf-UDP send_point_cloud_proto: false #true: Send point cloud through Protobuf-UDP pcap_path: /home/robosense/lidar.pcap #The path of pcap file ``` ​ 由于消息来自雷达，因此请设置 *msg_source* = 2。 ​ 将点云发送至ROS，因此设置 *send_point_cloud_ros = true*。 ### 3.2 设置配置文件中的lidar部分 ```yaml lidar: - driver: lidar_type: RS128 #The lidar type - RS16, RS32, RSBP, RS128, RS80 frame_id: /rslidar #The frame id of message device_ip: 192.168.1.200 #The device ip address msop_port: 6699 #The msop port of lidar,default is 6699 difop_port: 7788 #The difop port of lidar, default is 7788 start_angle: 0 #The start angle of point cloud area end_angle: 360 #The end angle of point cloud area min_distance: 0.2 #The minimum distance of point cloud area max_distance: 200 #The maximum distance of point cloud area use_lidar_clock: false #true--Use the lidar clock as the message timestamp;false-- Use the system clock as the timestamp angle_path: /home/robosense/angle.csv #The path of the angle calibration file. For the latest version lidars, there is no need to use this file. ros: ros_recv_packet_topic: /rslidar_packets #The topic which used to receive lidar packets from ROS ros_send_packet_topic: /rslidar_packets #The topic which used to send lidar packets through ROS ros_send_point_cloud_topic: /rslidar_points #The topic which used to send point cloud through ROS proto: point_cloud_recv_port: 60021 #The port number used for receiving point cloud point_cloud_send_port: 60021 #The port number which the point cloud will be send to point_cloud_send_ip: 127.0.0.1 #The ip address which the point cloud will be send to msop_recv_port: 60022 #The port number used for receiving lidar msop packets difop_recv_port: 60023 #The port number used for receiving lidar difop packets msop_send_port: 60022 #The port number which the msop packets will be send to difop_send_port: 60023 #The port number which the difop packets will be send to packet_send_ip: 127.0.0.1 #The ip address which the lidar packets will be send to - driver: lidar_type: RS128 #The lidar type - RS16, RS32, RSBP, RS128, RS80 frame_id: /rslidar #The frame id of message device_ip: 192.168.1.200 #The device ip address msop_port: 1990 #The msop port of lidar,default is 6699 difop_port: 1991 #The difop port of lidar, default is 7788 start_angle: 0 #The start angle of point cloud area end_angle: 360 #The end angle of point cloud area min_distance: 0.2 #The minimum distance of point cloud area max_distance: 200 #The maximum distance of point cloud area use_lidar_clock: false #true--Use the lidar clock as the message timestamp;false-- Use the system clock as the timestamp angle_path: /home/robosense/angle.csv #The path of the angle calibration file. For the latest version lidars, there is no need to use this file. ros: ros_recv_packet_topic: /left/rslidar_packets #The topic which used to receive lidar packets from ROS ros_send_packet_topic: /left/rslidar_packets #The topic which used to send lidar packets through ROS ros_send_point_cloud_topic: /left/rslidar_points #The topic which used to send point cloud through ROS proto: point_cloud_recv_port: 60024 #The port number used for receiving point cloud point_cloud_send_port: 60024 #The port number which the point cloud will be send to point_cloud_send_ip: 127.0.0.1 #The ip address which the point cloud will be send to msop_recv_port: 60025 #The port number used for receiving lidar msop packets difop_recv_port: 60026 #The port number used for receiving lidar difop packets msop_send_port: 60025 #The port number which the msop packets will be send to difop_send_port: 60026 #The port number which the difop packets will be send to packet_send_ip: 127.0.0.1 #The ip address which the lidar packets will be send to - driver: lidar_type: RS128 #The lidar type - RS16, RS32, RSBP, RS128, RS80 frame_id: /rslidar #The frame id of message device_ip: 192.168.1.200 #The device ip address msop_port: 2000 #The msop port of lidar,default is 6699 difop_port: 2001 #The difop port of lidar, default is 7788 start_angle: 0 #The start angle of point cloud area end_angle: 360 #The end angle of point cloud area min_distance: 0.2 #The minimum distance of point cloud area max_distance: 200 #The maximum distance of point cloud area use_lidar_clock: false #true--Use the lidar clock as the message timestamp;false-- Use the system clock as the timestamp angle_path: /home/robosense/angle.csv #The path of the angle calibration file. For the latest version lidars, there is no need to use this file. ros: ros_recv_packet_topic: /right/rslidar_packets #The topic which used to receive lidar packets from ROS ros_send_packet_topic: /right/rslidar_packets #The topic which used to send lidar packets through ROS ros_send_point_cloud_topic: /right/rslidar_points #The topic which used to send point cloud through ROS proto: point_cloud_recv_port: 60027 #The port number used for receiving point cloud point_cloud_send_port: 60027 #The port number which the point cloud will be send to point_cloud_send_ip: 127.0.0.1 #The ip address which the point cloud will be send to msop_recv_port: 60028 #The port number used for receiving lidar msop packets difop_recv_port: 60029 #The port number used for receiving lidar difop packets msop_send_port: 60028 #The port number which the msop packets will be send to difop_send_port: 60029 #The port number which the difop packets will be send to packet_send_ip: 127.0.0.1 #The ip address which the lidar packets will be send to ``` ​ 为每种雷达类型设置 *lidar_type* --- RS16, RS32, RSBP, RS128, RS80。 ​ 为每个雷达设置 *msop_port* 与 *difop_port* 。 ​ 为每个雷达设置 *ros_send_point_cloud_topic*。 ### 3.3 运行 ​ 运行示例程序并播放rosbag。