#ifndef __HI_SPI_H__
#define __HI_SPI_H__

typedef unsigned long long  __u64;
typedef unsigned int        __u32;
typedef unsigned short      __u16;
typedef unsigned char       __u8;

#ifdef __HuaweiLite__
#include <spi.h>
#else


/* User space versions of kernel symbols for SPI clocking modes,
 * matching <linux/spi/spi.h>
 */

#define SPI_CPHA        0x01
#define SPI_CPOL        0x02

#define SPI_MODE_0        (0|0)
#define SPI_MODE_1        (0|SPI_CPHA)
#define SPI_MODE_2        (SPI_CPOL|0)
#define SPI_MODE_3        (SPI_CPOL|SPI_CPHA)

#define SPI_CS_HIGH        0x04
#define SPI_LSB_FIRST    0x08
#define SPI_3WIRE        0x10
#define SPI_LOOP        0x20
#define SPI_NO_CS        0x40
#define SPI_READY        0x80

/*---------------------------------------------------------------------------*/

/* IOCTL commands */

#define SPI_IOC_MAGIC            'k'

/**
 * struct spi_ioc_transfer - describes a single SPI transfer
 * @tx_buf: Holds pointer to userspace buffer with transmit data, or null.
 *    If no data is provided, zeroes are shifted out.
 * @rx_buf: Holds pointer to userspace buffer for receive data, or null.
 * @len: Length of tx and rx buffers, in bytes.
 * @speed_hz: Temporary override of the device's bitrate.
 * @bits_per_word: Temporary override of the device's wordsize.
 * @delay_usecs: If nonzero, how long to delay after the last bit transfer
 *    before optionally deselecting the device before the next transfer.
 * @cs_change: True to deselect device before starting the next transfer.
 *
 * This structure is mapped directly to the kernel spi_transfer structure;
 * the fields have the same meanings, except of course that the pointers
 * are in a different address space (and may be of different sizes in some
 * cases, such as 32-bit i386 userspace over a 64-bit x86_64 kernel).
 * Zero-initialize the structure, including currently unused fields, to
 * accommodate potential future updates.
 *
 * SPI_IOC_MESSAGE gives userspace the equivalent of kernel spi_sync().
 * Pass it an array of related transfers, they'll execute together.
 * Each transfer may be half duplex (either direction) or full duplex.
 *
 *    struct spi_ioc_transfer mesg[4];
 *    ...
 *    status = ioctl(fd, SPI_IOC_MESSAGE(4), mesg);
 *
 * So for example one transfer might send a nine bit command (right aligned
 * in a 16-bit word), the next could read a block of 8-bit data before
 * terminating that command by temporarily deselecting the chip; the next
 * could send a different nine bit command (re-selecting the chip), and the
 * last transfer might write some register values.
 */
struct spi_ioc_transfer {
    __u64        tx_buf;
    __u64        rx_buf;

    __u32        len;
    __u32        speed_hz;

    __u16        delay_usecs;
    __u8        bits_per_word;
    __u8        cs_change;
    __u32        pad;

    /* If the contents of 'struct spi_ioc_transfer' ever change
     * incompatibly, then the ioctl number (currently 0) must change;
     * ioctls with constant size fields get a bit more in the way of
     * error checking than ones (like this) where that field varies.
     *
     * NOTE: struct layout is the same in 64bit and 32bit userspace.
     */
};

/* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
#define SPI_MSGSIZE(N) \
    ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
        ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
#define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])


/* Read / Write of SPI mode (SPI_MODE_0..SPI_MODE_3) */
#define SPI_IOC_RD_MODE            _IOR(SPI_IOC_MAGIC, 1, __u8)
#define SPI_IOC_WR_MODE            _IOW(SPI_IOC_MAGIC, 1, __u8)

/* Read / Write SPI bit justification */
#define SPI_IOC_RD_LSB_FIRST        _IOR(SPI_IOC_MAGIC, 2, __u8)
#define SPI_IOC_WR_LSB_FIRST        _IOW(SPI_IOC_MAGIC, 2, __u8)

/* Read / Write SPI device word length (1..N) */
#define SPI_IOC_RD_BITS_PER_WORD    _IOR(SPI_IOC_MAGIC, 3, __u8)
#define SPI_IOC_WR_BITS_PER_WORD    _IOW(SPI_IOC_MAGIC, 3, __u8)

/* Read / Write SPI device default max speed hz */
#define SPI_IOC_RD_MAX_SPEED_HZ        _IOR(SPI_IOC_MAGIC, 4, __u32)
#define SPI_IOC_WR_MAX_SPEED_HZ        _IOW(SPI_IOC_MAGIC, 4, __u32)

#endif
#endif /* __HI_SPI_H__ */